DigitalStorm Slade Pro Workstation PC Review
by Dustin Sklavos on April 23, 2014 12:00 AM EST- Posted in
- desktops
- Xeon
- Quadro
- DigitalStorm
- Workstation
- Octalcore
While the DigitalStorm Slade Pro is solid if unexceptional in more garden variety consumer level tasks, it fares much better when tested in workstation applications. SPECviewperf11 is a reliable suite that should give us a pretty good idea of how an 80W Kepler GPU can stack up against some of the older Fermi architecture cards.
The march of progress continues unabated. In most tests, the Slade Pro is at or near the top. At least where workstation benchmark performance is concerned, this is a well rounded, solid machine.
Lightwave 3D 9.6 is traditionally CPU bound and fairly well threaded; the only system to consistently best the Slade Pro's powerful octalcore Xeon is the Lenovo D30, which features two octalcore Xeons (albeit from the previous generation.) As workstation CPUs go, the Xeon E5-2687W v2 is actually very close to as good as it gets for a single socket system.
52 Comments
View All Comments
Katline - Wednesday, April 30, 2014 - link
Just got the Nexus wireless charger from Amazon and they are going absolutely crazy with the discounts with these brands. If you don't have a promo code, you can use this one: http://amzn.to/1iyFZfq - before they take it down.cadman777 - Thursday, March 26, 2015 - link
I bought a 'custom workstation' from Digital Storm, and had problems w/it from day-1. Due to my heavy work-load, I could not afford the down-time, which is why I contracted w/DS to build my machine. But after 2 years of headaches and problems, the computer finally quit working while troubleshooting w/their 'techs'. Turns-out, they selected uncertified RAM and never set the values properly in the BIOS. Plus, they stuffed an eATX m/b into an ATX case, and jacked-up the ESATA connectors/cables @ the edge of the m/b against the recess in the case. Also, it took an EVGA (the m/b mfgr) tech to figure out what was wrong w/the build. So, besides the wrong RAM, and a too small case, their builders and tech were incompetent. As for 'Warranty Support': They gave me the run-around time after time until I took matters into my own hands and figured out how to fix the problem. After $1000 out-of-pocket, and over 100 hours of tech 'troubleshooting' between the 2 companies, plus 6 months of broken work computer, I'm all the worse for the wear. Would I recommend DS? Nope. Would I buy from DS again? You're kidding me, right? I learned that if you want the job done right, DO IT YOURSELF. As far as Digital Storm is concerned: BUYER BEWARE! Cheers ... Chris